Description The connection of polyethylene material is used to connect the polyethylene pipe to threaded connections (such as: brain, riser and 2). Because screw fittings, such as polyethylene fittings, are not designed to use hot water and fluid, conventional temperatures must be used in the path of polyethylene pipes to prevent damage to them. These standards can be used at sub-zero temperatures if standard and quality are observed during production. Thoroughly clean the ends of the polyethylene pipes before installing them, then install the connection parts on the pipe in order. Before tightening the nut, make sure that all parts are properly inserted and use a latch that does not exceed 46 cm in length to close the connection. You can also use standard Teflon tape to ensure connection sealing. For more information, call 09339765265 Call 09123261608.